B-6
H8DCT-F/IBQF SERVERBOARD USER'S MANUAL
Checkpoint
Code Description
97h
Initialization before the C800 adaptor ROM gains control has completed. The adaptor ROM
check is next.
98h
The adaptor ROM had control and has now returned control to BIOS POST. Performing any
required processing after the option ROM returned control.
99h
Any initialization required after the option ROM test has completed. Confi guring the timer data
area and printer base address next.
9Ah
Set the timer and printer base addresses. Setting the RS-232 base address next.
9Bh
Returned after setting the RS-232 base address. Performing any required initialization before
the Coprocessor test next.
9Ch
Required initialization before the Coprocessor test is over. Initializing the Coprocessor next.
9Dh
Coprocessor initialized. Performing any required initialization after the Coprocessor test next.
9Eh
Initialization after the Coprocessor test is complete. Checking the extended keyboard, keyboard
ID, and Num Lock key next. Issuing the keyboard ID command next.
A2h
Displaying any soft errors next.
A3h
The soft error display has completed. Setting the keyboard typematic rate next.
A4h
The keyboard typematic rate is set. Programming the memory wait states next.
A5h
Memory wait state programming is over. Clearing the screen and enabling parity and the NMI
next.
A7h
NMI and parity enabled. Performing any initialization required before passing control to the
adaptor ROM at E000 next.
A8h
Initialization before passing control to the adaptor ROM at E000h completed. Passing control to
the adaptor ROM at E000h next.
A9h
Returned from adaptor ROM at E000h control. Performing any initialization required after the
E000 option ROM had control next.
Aah
Initialization after E000 option ROM control has completed. Displaying the system confi guration
next.
Abh
Uncompressing the DMI data and executing DMI POST initialization next.
B0h
The system confi guration is displayed.
B1h
Copying any code to specifi c areas.
00h
Code copying to specifi c areas is done. Passing control to INT 19h boot loader next.