3-5
Chapter 3: Troubleshooting
For <fi lename>.zip
Prepare a DOS or 98 bootable USB disk.
1.
Extract <fi lename>.zip fi le under Windows into the USB disk.
2.
Boot up system for which BIOS will be fl ashed from 98 bootable USB disk.
3.
At the prompt, type: [fl ash H8xxxxx.xxx] and hit enter.
4.
After the BIOS completes the fl ashes, system will reboot or needs manually
5.
reboot
It will show "CMOS Checksum Error" on the POST, press F1 key to boot into
6.
BIOS setup page.
Hit F9 Key to load optimal default setting, and change other BIOS setting if
7.
you needed.
Hit F10 to save the BIOS setting and system reboots.
8.
Question:
What's on the CD that came with my motherboard?
Answer:
The supplied compact disc has quite a few drivers and programs that will
greatly enhance your system. We recommend that you review the CD and install the
applications you need. Applications on the CD include chipset drivers for Windows
and security and audio drivers.
Question: Why can't I turn off the power using the momentary power on/off
switch?
Answer:
The instant power off function is controlled in BIOS by the Power Button
Mode setting. When the On/Off feature is enabled, the motherboard will have
instant off capabilities as long as the BIOS has control of the system. When the
Standby or Suspend feature is enabled or when the BIOS is not in control such
as during memory count (the fi rst screen that appears when the system is turned
on), the momentary on/off switch must be held for more than four seconds to shut
down the system. This feature is required to implement the ACPI features on the
motherboard.
