Chapter 4: AMI BIOS
4-53
Hot Plug
This feature designates the port specified for hot plugging. Set to Enabled
for hot-plugging support, which will allow the user to replace a SATA
disk drive without shutting down the system. The options are
Enabled
and
Disabled
.
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When it is
enabled, it will perform Staggered Spin Up on any drive this feature is
activated. The options are Enabled and
Disabled
.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the STATA
port. The options are Hard Disk Drive and Solid State Drive.
Trusted Computing
•
TPM20 Device Found
*
•
Vendor:
IFX*
•
Firmware Version:
5.51*
*Exact hardware details will depend on currently installed hardware.
Security Device Support
If this feature and the TPM jumper on the motherboard are both set
to Enabled, onboard security devices will be enabled for TPM (Trusted
Platform Module) support to enhance data integrity and network security.
Please reboot the system for a change on this setting to take effect. The
options are Disable and
Enable
.
The following Platform Configuration Register information will be dis
-
played:
•
Active PCR banks: SHA-1,SHA256
•
Available PCR banks: SHA-1,SHA256
*If the feature 'Security Device Support' is set to Enable, the following
features will become available for configuration:
Summary of Contents for C9X299-PG
