Supero C7SIM-Q, User Manual

Page: 77 / 107

Chapter 4: AMI BIOS
4-9
providing the user with greater reliability, security and availability in networking and
data-sharing. The settings are Enabled and
Disabled .
Active State Power Management
Select Enabled to start Active-State Power Management for signal transactions
between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving
and transaction speed. The options are Enabled and
Disabled .
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled,
PCI and LPC.
USB Functions
This feature allows the user to decide the number of onboard USB ports to be
enabled. The Options are: Disabled and
Enabled .
Legacy USB Support (available if USB Functions above is Enabled)
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy
USB support will be automatically enabled if a legacy USB device is installed
on the motherboard, and vise versa. The settings are Disabled, Enabled
and
Auto .

SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE Devices and displays the following items:
SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, selecting
Enhanced will set SATA#1 to native SATA mode. The options are Disabled, Com-
patible,
Enhanced.
Configure SATA as
This feature allows the user to select the drive type for SATA#1. The options
are
IDE , RAID and AHCI.
SATA#2 Configuration (Available if IDE is enabled under "Configure SATA#1
as" above)
Selecting Enhanced will set SATA#2 to native SATA mode. The options are Dis-
abled and
Enhanced