Supero C7SIM-Q, User Manual

Page: 103 / 107

Intel® AMT Management Engine Setup
C-5
Network Setup
Intel® ME Network Name Settings
Host Name - This will be the host name of the machine. •
Domain Name - A domain name where the machine belongs to. •
Shared/Dedicated FQDN - This determines if the FQDN (Fully Qualified •
Domain Name) is shared with the host and the same as the operating
system machine or is unique to the Intel ME.
Dynamic DNS Update - This option will enable Intel ME to actively try
•
to register its IP addresses and FQDN in DNS using the Dynamic DNS
Update protocol.
TCP/IP Settings
Wired LAN IPV4 Configuration
DHCP Mode - Enables DHCP (Dynamic Host and Configuration Protocol). •
This allows the Intel ME to confgure its network settings such as IP Ad-
dress, Subnet Mask, Gateway, via the DHCP server in the network.
If DHCP is disabled (Static IP mode), the following options are avail-
able:
IPV4 address - enter a valid IP address here. •
Subnet Mask - i.e., 255.255.255.0 •
Default Gateway Address - enter your network's gateway IP ad- •
dress.
Preferred DNS Address - the DNS server your network uses.
•
Alternate DNS Address - a secondary DNS server your network •
uses.
Wired LAN IPV6 Configuration
If Wired LAN IPV6 feature is enabled, the following options are avail-
able:
IPV6 Interface ID Type - The auto-configured IPv6 address consists •
of two parts, the IPv6 Prefix set by the IPv6 router is the first and
the interface ID is following part (64 bits each).
Random ID - The IPv6 Interface ID is generated using a random
number as described in RFC 3041.
Intel ID - The IPv6 Interface ID is automatically generated using
the network interface's MAC address.