Supero C7B360-CB-ML, User Manual

Page: 34 / 113

2-8
Supermicro C7B360-CB-ML Motherboard User’s Manual
For the 1U passive heat sink, ask for SNK-P0046P (back plate is
included), for the 2U active heat sink, SNK-P0046A4.
JTPM1
JSTBY1
JF1
USB 2/3
USB 8/9(3.0)
COM1
JWD1
JPME2
JL1
AUDIO FP
JD1
JSD1
BIOS
JBT1
JCMOS
PCH SLOT4 PCI-E 3.0 X1
PCI-E M.2-M2
PCH SLOT5 PCI-E 3.0 X1
LED1
I-SATA4 I-SATA2 I-SATA0
2280
MH13
PCH SLOT6 PCI-E 3.0 X1
LED6
JSPDIF_OUT
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
PCI-E M.2-M1
SYS_FAN2
2242
2260
MH11
2280
MH12
MH10
JI2C1 JI2C2 J9702
LED18
J9701
USB6/7(3.0)
USB2
SYS_FAN1
LAN1
JPW1
DVI
HDMI/DP
DIMMB2
DIMMB1
DIMMA2
DIMMA1
JVR1
CPU_FAN1
VGA LED
DIMM LED
CPU LED
BOOT LED
JPW2
KB/MOUSE
USB 0/1
A A A A
C
BIOS LICENSE
`
^
MAC CODE
BAR CODE
`
^
DESIGNED IN USA
REV:1.00
C7B360-CB-ML
`
^
I-SATA1
I-SATA3 I-SATA5
USB4/5(3.0)
CPU
2-4 Installing DDR4 Memory
Note : Check the Supermicro website for recommended memory
modules.
Attention! Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
DIMM Installation
1. Insert the desired number of
DIMMs into the memory slots,
starting with DIMMA1, then
DIMMB1, DIMMA2, and DIMMB2.
For the system to work properly,
please use the memory modules
of the same type and speed in
the same motherboard.
Release Tabs
Notches
2. Push the release tabs outwards
on both ends of the DIMM slot
to unlock it.
Press both notches
straight down into
the memory slot.
3. Align the key of the DIMM mod-
ule with the receptive point on the
memory slot.
4. Align one end of the DIMM mod-
ule to the receptive point on the
stationary end of the slot, and the
other end of the DIMM to the lock-
ing end of the slot.
5.
Press down on the stationary end of
the slot first, then the locking end
until the module snaps into place.
6.
Press the release tab to the lock
position to secure the DIMM module
into the slot.
Removing Memory Modules
Reverse the steps above to remove the
DIMM modules from the motherboard.