Supero C7B360-CB-ML, User Manual

Page: 92 / 113

Chapter 4: AMI BIOS
4-27
Onboard LAN Option ROM type
Use this feature to select the type of option ROM installed. The options
are EFI or
Legacy .
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer us-
ing a PXE device installed in a LAN port specified. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled or
PXE .
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unified Extensible Firmware Interface) for network stack support. The
options are Disabled or Enabled.
*If this feature is enabled, the two features below are available.
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv4 PXE boot option will
not be supported. The options are Disabled or
Enabled .
Ipv4 HTTP Support
Use this feature to enable IPv4 HTTP boot support. The options are
Disabled or Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv6 PXE boot option will
not be supported. The options are Disabled or
Enabled.
Ipv6 HTTP Support
Use this feature to enable IPv6 HTTP boot support. The options are
Disabled or Enabled.
IPSEC Certificate
This feature enables IPSEC certificate for Ikev. The options are Disabled
or Enabled .
PXE boot wait time
Enter a value for the wait time (in seconds) to press the ESC key to
abort the PXE boot. The default is
0 .