Supero AOC-USAS-H8ir User Manual Download

Page: 5 / 54

Safety Information and Technical Specifi cations

Introduction

Overview

This manual is written for system integrators, PC technicians and knowledgeable

PC users who intend to integrate SuperMicro's USAS-H8ir Add on Card to their

system.

Product Features

The AOC-USAS-H8ir offers the following features:

• UIO Form Factor.

• Two Internal "ipass" cable ports.

• Support for RAID 0, 1, 5, 6, 10, 50, and 60.

• Preinstalled iButton

Operating Systems Supported

The AOC-USAS-H8ir support the following Operating Systems (OS):

• Windows 2000/Windows XP/Windows 2003

• Red Hat Enterprise Linux/SUSE Linux

Each operating system must include the latest patches, hot fi xes, and at least, 256

MB of free hard drive space.

Manual Images

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this manual.

Summary of Contents for AOC-USAS-H8ir























































Search results

Summary of Contents for AOC-USAS-H8ir

Reviews:

Related manuals for AOC-USAS-H8ir

Brands by name

Popular brands

Supero AOC-USAS-H8ir, User Manual

Search results

Summary of Contents for AOC-USAS-H8ir

Reviews:

Related manuals for AOC-USAS-H8ir

Brands by name

Popular brands