Supero A+ SERVER 4042G-6RF, User Manual

Page: 3 / 116

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ SERVER 4042G-6RF/TRF.
Installation and maintenance should be performed by experienced technicians only.
The A+ SERVER 4042G-6RF/TRFs are high-end servers based on the
SC748TQ-R1400B chassis and the H8QG6/i-F, high-end serverboards that are
based on the AMD® SR5690/SR5670/SP5100 chipset and supports four AMD
Socket G34 type processors with up to 1 TB of DDR3-1333/1066 registered ECC
SDRAM.
The A+ SERVER 4042G-TRF contains an H8QGi-F serverboard without SAS2
features while the A+ SERVER 4042G-6RF contains an H8QG6-F serverboard
with SAS2 features.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the H8QG6/i-F serverboard and
the SC748TQ-R1400B chassis, which comprise the 4042G-6RF/TRF.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ SERVER
4042G-6RF/TRF into a rack and check out the server configuration prior to
powering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions when installing and servicing the server.