Supero A+ SERVER 2022TG-HIBQRF, User Manual

Page: 50 / 107

Chapter 5: Advanced Serverboard Setup
Trusted Platform Module Header
This header is used to connect a Trusted
Platform Module (TPM), available separately
from a third-party vendor. A TPM is a
security device that allows encryption and
authentication of hard drives, disallowing
access if the TPM associated with it is not
installed in the system. See the table on the
right for pin defi nitions.
5-15
JP3 Adapter Card Connector
JP3 Adapter card connector slot provides
front access to the power supply, serial ATA
and Front Panel Control connections for
the H8DGT series motherboards. Plug an
Adapter card into this connector to use the
functions indicated above. This
connector is designed specifi cally for a
Supermicro- proprietary adapter card.
Infi niBand Connector (2022TG-HIBQRF
only)
The H8DGT-HIBQF serverboard includes
a single QDR (quad data rate) speed
Infi niBand QSFP connector located at JB1
on the serverboard.
The JIB1 jumper must be enabled to use
the Infi niBand connector on the serverboard
(see section 5-10). LED indicators on the
board indicate use and activity on the Infi
niBand connector (see section 5-11 for
details).
Trusted Platform Module Header
Pin Defi nitions
(JTPM1)
Pin# Defi nition Pin# Defi nition
1 LCLK GND
3 LFRAME No Pin
5 LRESET VCC5
7 LAD3 LAD2
9 VCC3 LAD1
11 LAD0 GND
13 RSV0 RSV1
15 SB3V SERIRQ
17 GND CLKRUN
19 LPCPD RSV2