Supero A+ SERVER 2022TG-HIBQRF User Manual Download

Page: 102 / 107

Appendix B: Installing Windows

Appendix B

Installing Windows

After all hardware components have been installed, you must fi rst confi gure Intel

South Bridge RAID Settings before you install the Windows OS and other software

drivers. To confi gure RAID settings, please refer to RAID Confi guration User Guides

posted on our web site at

www.supermicro.com/support/manuals.

B-1 Installing the Windows OS for a RAID System

1. Insert Microsoft's Windows XP/2003/2008/Vista Setup CD in the CD driver

and the system will start booting up from CD.

2. Press the <F6> key when the message "Press F6 if you need to install a third

party RAID driver" displays.

3. When the Windows OS Setup screen appears, press "S" to specify additional

device(s).

4. Insert the driver diskette "ITE RAID Windows XP/2003/2008/Vista Driver for

IDE" into the fl oppy drive and press the <Enter> key.

5. When the Windows OS Setup screen appears, press "S" to specify additional

device(s).

6. Insert the driver diskette into the drive and press the <Enter> key.

7. Choose the LSI SAS RAID driver indicated in the Windows OS Setup screen,

and press the <Enter> key.

8. Press the <Enter> key to continue the installation process. (If you need to

specify any additional devices to be installed, do so at this time.) Once all

devices are specifi ed, press the <Enter> key to continue with the installation.

9. From the Windows OS Setup screen, press the <Enter> key. The Windows

OS Setup will automatically load all device fi les and then, continue the

Windows OS installation.

10. After the Windows OS Installation is completed, the system will automatically

reboot.

B-1

Summary of Contents for A+ SERVER 2022TG-HIBQRF












































































































Search results

Summary of Contents for A+ SERVER 2022TG-HIBQRF

Reviews:

Related manuals for A+ SERVER 2022TG-HIBQRF

Brands by name

Popular brands

Supero A+ SERVER 2022TG-HIBQRF, User Manual

Search results

Summary of Contents for A+ SERVER 2022TG-HIBQRF

Reviews:

Related manuals for A+ SERVER 2022TG-HIBQRF

Brands by name

Popular brands