Supero 6047R-E1R24N, User Manual

Page: 82 / 130

6-2
S
UPER
S
TORAGE
S
YSTEM 6047R-E1R24N User's Manual
Figure 6-1. Front and Rear Chassis Views
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system status indications. A
ribbon cable has bundled these wires together to simplify the connection. Connect
the cable from JF1 on the serverboard to the Control Panel PCB (printed circuit
board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess
cabling out of the airfl ow path. The LEDs inform you of system status. See Chap-
ter 3 for details on the LEDs and the control panel buttons. Details on JF1 can be
found in Chapter 5.
Hard Drives (24) Control Panel
Power Supplies (2)
I/O Ports Optional Rear Hot-Swap Drive Bays PCI Expansion Slots
Hardware RAID Add-on Card and JBOD Expansion Ports