Supero 6047R-E1R24N, User Manual

Page: 85 / 130

Chapter 6: Advanced Chassis Setup
6-5
Warning: Use caution when working around the backplane. Do not touch the back-
plane with any metal objects and make sure no ribbon cables touch the backplane or
obstruct the holes, which aid in proper airfl ow.
Figure 6-3. Replacing System Cooling Fans
6-5 Drive Bay Installation/Removal
Accessing the Drive Bays
SATA Drives: You do not need to access the inside of the chassis or remove power
to replace or swap SATA drives. Proceed to the next step for instructions.
Note: You must use standard 1" high, drives in the SuperServer 6047R-E1R24N.
DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive bay, proceed
to the "5.25" Drive Bay Installation" section later in this chapter for instructions.