Supero 2122TC-DL6RF4, User Manual

Page: 58 / 118

5-6
A+ SERVER 2122TC-DL6RF4 USER'S MANUAL
1. Remove power from the system
and unplug the AC power cord
from the power supply.
2. Do not apply any thermal grease
to the heatsink or the CPU die;
the required amount has already
been applied.
3. Place the heatsink on top of the
CPU so that the four mounting
holes are aligned with those
on the (preinstalled) heatsink
retention mechanism.
Note : Make sure the heatsink
is placed so that the fins of the
heatsink are in the direction of the
airflow in your system
4. Screw in two diagonal screws (i.e.
the #1 and the #2 screws) until
just snug. Do not fully tighten the
screws or you may damage the
CPU.
5. Add the two remaining screws
then finish the installation by fully
tightening all four screws.
Installing a CPU Heatsink
Screw #1 Screw #2
Screw #1 Screw #2
Install Screw #1