Supero 2027R-E1R24N, User Manual

Page: 93 / 114

Chapter 7: BIOS
7-1

Thermal Configuration
Thermal Management
Select Enabled to initialize the PCH Thermal subsystem device located at D31:F6.
The options are
Enabled and Disabled.
ME SMBus Thermal Reporting
Select Enabled to support ME SMBus (System Management Bus) reporting. The
options are
Enabled and Disabled.
PCH Temp Read
Select Enabled to allow the BIOS to read the PCH temperature. The options are
Enabled
and Disabled.
CPU Energy Read
Select Enabled to allow the BIOS to read the CPU energy status. The options are
Enabled and Disabled.
CPU Temp Read
Select Enabled to allow the BIOS to read the CPU temperature. The options are
Enabled and Disabled.
Alert Enable Lock
Select Enabled to lock all alert-enabling settings. The options are Enabled and
Disabled .

PCIe/PCI/PnP Configuration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are mul-
tiple Option ROMs available in the system. The options are EFI Compatible ROM
and
Legacy ROM
.
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64 , 96,
128, 160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and
Disabled .