Supero 2027R-E1R24N User Manual Download

Page: 79 / 114

Chapter 7: BIOS

7-1

Supermicro X9DR6-LN4+

SMC Version

This item displays the SMC version of the BIOS ROM used in this system.

SMC Build Date

This item displays the date that the BIOS Setup utility was built.

Memory Information

Total Memory

This displays the amount of memory that is available in the system.

7-3 Advanced Setup Configurations

Use the arrow keys to select Boot Setup and press <Enter> to access the following
submenu items.



Boot Features

Quiet Boot

This feature allows the user to select bootup screen display between POST mes-
sages and the OEM logo. Select Disabled to display the POST messages. Select
Enabled to display the OEM logo instead of the normal POST messages. The op-
tions are

Enabled

and Disabled.

Summary of Contents for 2027R-E1R24N



















































































































Search results

Summary of Contents for 2027R-E1R24N

Reviews:

Related manuals for 2027R-E1R24N

Brands by name

Popular brands

Supero 2027R-E1R24N, User Manual

Search results

Summary of Contents for 2027R-E1R24N

Reviews:

Related manuals for 2027R-E1R24N

Brands by name

Popular brands