Supero 2027R-AR24, User Manual

Page: 109 / 126

Chapter 7: BIOS
7-19
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni fi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled
. Note that if Enabled, IPV4 and IPV6 PXE support will be disabled.

Serial Port Console Redirection
These submenus allow the user to con fi gure the following Console Redirection
settings for a COM Port 0 or COM Port 1 as speci fi ed by the user.
COM1/COM2
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are
Enabled
and Disabled.

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are ANSI, VT100,
VT100+
, and VT-UTF8.
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client
computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200, 38400, 57600, and
115200
(bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 and
8
(Bits).
Parity
A parity bit can be sent along with regular data bits to detect data transmission
errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits
is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits
is odd. Select None if you do not want to send a parity bit with your data bits in