Supero 1027R-72BRFTP, User Manual

Page: 62 / 130

5-16
S
UPER
S
ERVER 1027R-72BRFTP User's Manual
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to a hardware reset switch on the
computer case. Refer to the table on
the right for pin definitions.
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be configured to function as
a suspend button (with a setting in
the BIOS - See Chapter 5). To turn
off the power when the system is in
suspend mode, press the button for 4
seconds or longer. Refer to the table
on the right for pin definitions.
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
SAS BBU Connector
Two SAS Battery Backup Unit (BBU)
connectors are located in the front of
the chassis. In the event of a power
outage,the BBU units will provide
backup power for SAS connection use.