Supero 1027R-72BRFTP, User Manual

Page: 106 / 130

7-16
S
UPER
S
ERVER 1027R-72BRFTP User's Manual
AHCI Mode
The following items are displayed when the AHCI Mode is selected.
Aggressive Link Power Management
When Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during
extended periods of I/O inactivity, and will return the link to an active state
when I/O activity resumes. The options are
Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are
Enabled
and Disabled.
Port 0~5 Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and
Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
Onboard SATA RAID Oprom/Driver
Use this feature to enable the onboard SATA Option ROM or EFI Driver.
The options are
Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are
Enabled
and Disabled.

SCU (Storage Control Unit) Configuration
Storage Controller Unit
Select Enabled to enable PCH SCU storage devices. The options are Disabled
and
Enabled .
SCU RAID Option ROM
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device. The options are Disabled and
Enabled .
SCU Port 0~SCU Port 3
: The AMI BIOS will automatically detect the onboard SCU
devices and display the status of each SCU device as detected.