To parents: this product is only applicable for children over 14 years old. For your children’s safety
during playing, please read this Instructions together with your children first. Do not pick up moving
drone to avoid injury. When turning on the drone, please keep hair and clothes away from it.
(Any modification to the product without authorization will damage your rights on the product)
Safety Warning:
Warning
: Contains small parts and it is not suitable for children under 14 years old.
1.Turn on the drone and place on flat surface, then turn on the remote. The controllers
indicator light will flash. After flashing, the controller's indicator light will stay on. The
drones lights will stay on after flashing 2-3 times. At this time, your drone is ready to fly.
2.If step one does not work. Turn on the drone and place on flat surface, then turn on the
remote. Then push the throttle handle and the forward/backward, left/right
side flight control handle to the bottom right at the same time. The light will turn off and start flash
automatically, release the handle, this means the manual pairing is successful.
3.If the quadcopter is flown outside of the range of the transmitter, the quadcopter will
hold its position until it gets a signal from the transmitter. This will allow you close the
gap between you and the quadcopter and safely land it.
Operating Method
Control Notes:
When you push on the controller's handles,do not push hard/fast, you must adjust
slowly, you can go faster as you get better at controlling the drone. For beginners (after
finishing trim procedures), the most important point is to be familiar with the controls.
At first, you need to learn how to control the left handle to let the drone keep distance
from the ground and hover, about 3ft is a safe start to limit falling damage. After
mastering hovering try moving in different directions and/or the stunt button. Once you
master the basics you can try out all kinds of tricks. Practice makes perfect.
Operating Notes:
Do not attach anything to your drone as it may cause undesired flight patterns
and/or cause permanent damage.
When push downward on the right
handle, the drone's head goes up and
the drone moves backward.
Backward
When push upward on the right
handle, the drone's head goes down
and the drone moves forward.
Forward
When you push the left handle left, the
drone's head turns to left. When push the
left handle to right, the drone turns right.
Change
direction
When you push downward on the left
handle,the main blades speed
slow down and the drone descends.
Descend
When you push upward on the
left handle, the main blades speed
increases and the drone ascends.
Ascend
5
NOTE: 2.4GHz Frequency Instructions
1.
SD Card Installation:
Insert the SD card into the slot, lightly press until the SD card clicks into place. Press
the SD card to eject card.
Note:
The camera indicator will not light up if the SD card is not inserted properly.
2.
Camera Light:
[Green – Standby status] [Red Light Flashes Continuously – Start to record]
[Red Light Stops Flashing – Quit recording]
3.
Recording Function:
Turn on the drone, press the Camera Button to start recording. Press the Camera
Button again to quit the recording process and save the video onto the SD card.
4.
Video Operations:
Turn the quadcopter off. Remove the SD card, then install it into a card reader (connected
to the computer). Video can be viewed using most media players.
