3
Replacing Rotor Blades:
1.To replace the rotor blades,
according to the figure, change
corresponding like rotor blades.
If changed incorrectly, you will not
be able to control.
2.Rotor Blade A turns counter
clockwise direction, Rotor Blade B
turns clockwise direction.
1
2
3
Open the battery cover on the back of
controller by sliding down.(Pic.1)
Close the battery cover.
According to the -/+ polarity, place
4×1.5"AA"(LR6) alkaline batteries into
the battery compartment.
(batteries not included)
(Pic. 2).
Rotor Blade A
Rotor Blade A
Rotor Blade B
Rotor Blade B
Tips
: When the power indicator of the controller starts blinking, please replace batteries per the above steps.
Notes:
Keep the instruction for future reference.
Use this product in strict accordance with the instructions.
Recommended to use new batteries for the best performance.
1. Non-rechargeable battery can not be charged.
2. Rechargeable battery can only be charged under the supervision of adults.
3. Recharge the battery at least once every 6 months.
4. Rechargeable battery shall be taken out from the transmitter before charging.
5. Batteries with different types or new and used batteries can not be used together.
6. Only same or suggested batteries can be used.
7. Install batteries with correct polarity.
8. Take exhausted batteries out of the transmitter.
9. Avoid short circuit at terminals of battery.
10. Before charging, check if the charger is damaged; and if it is damaged, please replace.
11. Do not contact the rotating propeller directly with hand, or it may cause injury.
12. When flying drone, please keep your hair and loose clothes away from the propellers.
13. Please check the wire, plug, shell and other parts of charger periodically, if there is any damage, stop
using it till it is repaired or replaced.
Warnings:
Installing Controller Batteries
(Pic.2)
(Pic.1)
