Chapter 2: Installation
2-3
(The CEK Heatsink is heavy; please handle with
care.)
Heatsink
1. Do not apply any thermal compound to
the heatsink or the CPU die-the required
amount has already been applied.
2. Place the heatsink on top of the
CPU so that the four mounting holes
are aligned with those on the retention
mechanism.
3. Screw in two diagonal screws (ie the
#1 and the #2 screws) until just snug (-do
not fully tighten the screws to avoid pos-
sible damage to the CPU.)
4. Finish the installation by fully tightening
all four screws.
Screw#1
Screw#2
Screw#1
CEK Heatsink Installation
Screw#2
