Appendix C: Software Installation Instructions
C-7
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties
to the array.
*Caution:
Once the array is created and its properties are assigned,
you cannot change the array properties using the ACU. You will need to
use the Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's
User's Guide in the enclosed CD.)
To assign properties to the new array:
1.
In the Array Properties menu (as shown in the following screen),
select an array type and press
Enter
.
Note that only the available array types: RAID 0, and RAID1, are dis-
played on the screen. (*RAID 0 or RAID 1 requires two drives.)
Summary of Contents for X6DAR-8G
Page 1: ... X6DAR 8G X6DAR iG USER S MANUAL Revision 1 0 SUPER ...
Page 9: ...Chapter 1 Introduction 1 3 Introduction Figure 1 1 X6DAR 8G X6DAR iG Image ...
Page 73: ...Chapter 4 BIOS 4 19 Vcore A Vcore B P3V3 P5V N12V P12V VDD P5Vsb ...
Page 84: ...A 6 X6DAR 8G X6DAR iG User s Manual Notes ...