C-10
X6DAR-8G/X6DAR-iG User's Manual
Adding a Bootable Array
To make an array bootable:
1.
From the Main menu, select
Manage Arrays.
2.
From the List of Arrays, select the array you want to make
bootable, and press
Ctrl+B.
3.
Enter Y to create a bootable array when the following message is
displayed: "This will make all other existing bootable array non-bootable. Do
you want to make this array bootable? (Yes/No):" Then, a bootable array
will be created. An asterisk will appear next to the bootable array (as
shown in the picture below:)
Deleting a Bootable Array
To delete a bootable array:
1.
From the Main menu, select
Manage Arrays.
2.
From the List of Arrays, select the bootable array (*) you want to delete,
and press
Ctrl+B
. (* a bootable array is the array marked with an asterisk
(as shown in the picture above.)
3.
Enter Y to delete a bootable array when the following message is
displayed: "The array is already marked bootable. Do you want to make this
array as not bootable? (Yes/No):" Then, the bootable array will be deleted
and the asterisk will disappear.
(*Note: do not use the delete key to delete the bootable array.)
Summary of Contents for X6DAR-8G
Page 1: ... X6DAR 8G X6DAR iG USER S MANUAL Revision 1 0 SUPER ...
Page 9: ...Chapter 1 Introduction 1 3 Introduction Figure 1 1 X6DAR 8G X6DAR iG Image ...
Page 73: ...Chapter 4 BIOS 4 19 Vcore A Vcore B P3V3 P5V N12V P12V VDD P5Vsb ...
Page 84: ...A 6 X6DAR 8G X6DAR iG User s Manual Notes ...
