Chapter 4: BIOS
89
Serial ATA Port 0~5
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Serial ATA Port 0~5 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
Serial ATA Port 0~5 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled
and Enabled.
Serial ATA Port 0~5 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State
Drive.
PCH-FW Configuration
The following firmware information will display:
•
ME Firmware Version
•
ME Firmware Mode
•
ME Firmware SKU
ME FW Image Re-Flash
Use this feature to update the Mangement Engine firmware. The options are
Disabled
and
Enabled.
Manageability Features State
Enabled this feature to allow system administrators to configure the ME BIOS extension
(MEBx) configuration settings. The options are Disabled and
Enabled
.
AMT BIOS Features
Disable this feature to deny access to the MEBx setup. The options are
Disabled
and Enabled.
*If the feature "AMT BIOS Features" above is set to Enabled, the AMT Configuration
submenu will be available for configuration:
