X11SCQ/-L User's Manual
90
AMT Configuration
ASF support
Use this feature to enable or disable Alert Standard Format support. This feature sends an
alert about a potential issue when the operating system is in a sleep state. The options are
Disabled and
Enabled.
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are
Disabled
and Enabled.
CIRCA Configuration
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the
CIRCA boot. The options are
Disabled
and Enabled.
*If the feature "Activate Remote Assistance Process" above is set to Enabled, the
feature below will be available for configuration:
CIRCA Timeout
Use this feature to set the timeout value for MPS connection. Use 0 for the default timeout
value of 60 seconds.
ASF Configuration
PET Progress
Use this feature to enable or disable PET Events Progress to receive PET Events alerts.
The options are Disabled and
Enabled
.
WatchDog
Select Enabled to allow AMT to reset or power down the system if the operating system
or BIOS hangs or crashes. The options are
Disabled
and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog (above) is enabled. This is a timed delay in seconds,
before a system power down or reset after a BIOS or operating system failure is detected.
Enter the value in seconds.
ASF Sensors Table
Enable this feature for the ASF Sensor Table to be added into the ASF! ACPI table. The
options are
Disabled
and Enabled.
