Chapter 3: Troubleshooting
67
3.5 Battery Removal and Installation
Battery Removal
To remove the onboard battery, follow the steps below:
1.
Power off your system and unplug your power cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver, push the battery lock outwards to
unlock it. Once unlocked, the battery will pop out from the holder.
4. Remove the battery.
Proper Battery Disposal
Please handle used batteries carefully. Do not damage the battery in any way; a damaged
battery may release hazardous materials into the environment. Do not discard a used battery
in the garbage or a public landfill. Please comply with the regulations set up by your local
hazardous waste management agency to dispose of your used battery properly.
Battery Installation
1. To install an onboard battery, follow the steps 1 & 2 above and continue below:
2. Identify the battery's polarity. The positive (+) side should be facing up.
3. Insert the battery into the battery holder and push it down until you hear a click to
ensure that the battery is securely locked.
Important:
When replacing a battery, be sure to only replace it with the same type.
OR
LITHIUM BATTERY
BATTERY HOLDER
LITHIUM BATTERY
BATTERY HOLDER
This warranty only covers normal consumer use and does not cover damages incurred in
shipping or from failure due to the alteration, misuse, abuse or improper maintenance of
products. During the warranty period, contact your distributor first for any product problems.
Summary of Contents for X11DPU-X
Page 1: ...USER S MANUAL Revision 1 0a X11DPU X X11DPU XLL...
Page 8: ...8...
