Supermicro X10SDV-F, User Manual

Page: 20 / 111

1-12
X10SDV-TLN4F/F Motherboard User’s Manual
1-3 Special Features
Recovery from AC Power Loss
Basic IO System (BIOS) provides a setting for you to determine how the system will
respond when AC power is lost and then restored to the system. You can choose for
the system to remain powered off, (in which case you must press the power switch
to turn it back on), or for it to automatically return to a power-on state. See the Ad-
vanced BIOS Setup section to change this setting. The default setting is
Last State .
1-4 PC Health Monitoring
This section describes the PC health monitoring features of the board. All have
an onboard System Hardware Monitoring chip that supports PC health monitoring.
An onboard voltage monitor will scan these onboard voltages continuously: +1.8V,
+3.3V, +5V, +/-12V, +3.3V Stby, +5V Stby, VBAT, HT, Memory, PCH Temperature,
System Temeperature, and Memory Temperature. Once a voltage becomes un-
stable, a warning is given, or an error message is sent to the screen.
Environmental Temperature Control
The X10SDV-F motherboard comes with a passive heatsink built in, while the
X10SDV-TLN4F comes with an active heatsink. Please follow the instructions given
in your system design guide or your system user manual to provide adequate airflow
to your system. The onboard BaseBoard Management Controller (BMC) monitors
CPU, memory and motherboard environment temperatures for fan control and PC
health management.
Note : To avoid possible system overheating, please be sure to provide
adequate airflow to your system.
System Resource Alert
This feature is available when the system is used with SuperDoctor ® 5 in the
Windows and Linux operating systems. SuperDoctor is used to notify the user
of certain system events. For example, you can also configure SuperDoctor to
provide you with warnings when the system temperature, CPU temperatures,
voltages and fan speeds go beyond predefined thresholds.