Supermicro X10SDV-F, User Manual

Page: 39 / 111

Chapter 2: Installation
2-17
Power Button
OH/Fan Fail/PWR Fail
1
NIC1 Activity LED
Reset Button
2
HDD LED
FP PWR LED
Reset
PWR
3.3 V
3.3V Stby
Ground
Ground
15 16
X
NIC2 Activity LED
3.3V Stby
3.3V Stby
UID LED
3.3V
A. (Blue) UID LED
B. (Red) OH/Fan Fail/PWR Fail LED
A
B
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and
UID LED connections. The blue LED
on pin 7 works as the front panel UID
LED indicator. The red LED on pin 8
works provides warnings of overheat,
fan failure or power failure. The red
LED takes precedence over the blue
LED by default. Refer to the table on
the right for pin definitions.
OH/Fan Fail/ PWR Fail/Blue_UID LED
Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 OH/Fan Fail/Power Fail Cathode
Power Fail LED
The Power Fail LED connection is
located on pins 7 and 8 of JF1. Re-
fer to the table on the right for pin
definitions.
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
JF1 Header Pins