Chapter 6: BIOS
71
CPU Slot 6 PCI-E x16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specified by the user. The options are
Legacy
and UEFI.
Onboard Lan Support 1/2
This feature allows the user to enable and disable onboard LAN1/2 controller. The default of
Onboard Lan1/2 Support is
Enabled
.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Use the above four items to select the type of device installed in a LAN port specified by the
user for system boot. The default setting for Onboard LAN1 Option ROM is
PXE
, the Onboard
LAN2 Option ROM is
Disabled
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and
Enabled
.
*If the item "Network Stack" is set to Enabled, the four items below will be displayed:
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are
Disabled
and Enabled.
Ipv4 HTTP Support
This feature allows the user to enable and disable Ipv4 HTTP boot support. If disabled, Ipv4
HTTP boot support will not be available. The options are
Disabled
and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are
Disabled
and Enabled.
Ipv6 HTTP Support
This feature allows the user to enable and disable Ipv6 HTTP boot support. If disabled, Ipv6
HTTP boot support will not be available. The options are
Disabled
and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is
0
.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is
1
.
