59
Chapter 3: Maintenance and Component Installation
Changing the Power Supply Module (Non-redundant Models)
The SSG-6049SP-E1CR60 model with 100-127Vac power has non-redundant power. The
system will need to be shut down before replacing a power supply module.
1. Remove power from the system and unplug the AC cord from the module to be
replaced.
2. On the back of the module, push the release tab sideways, as illustrated.
3. Pull the module out using the handle.
4. Push the new module into the power bay until it clicks. Replace with the same model.
5. Plug the AC power cord back into the module and power the system back on.
