Supermicro SuperStorage Server SSG-6049SP-E1CR60 User Manual Download Page 94

Page: 94 / 164

SuperStorage Server SSG-6049SP-E1CR60/90 User's Manual



Intel® VMD for Volume Management Device on CPU2

Intel® VMD for Volume Management Device for PStack0

Select Enable to use the Intel® Volume Management Device Technology support for

the root port specified by the user. The options are

Disable

and Enable.

*If the feature "Intel® VMD for Volume Management Device" is set to Enable,

the following features will be available:

VMD port 1A (Available when the device is detected by the system)

Select Enable to enable Intel® Volume Management Device Technology support for

the PCIe slot specified by the user. The options are

Disable

and Enable.

VMD port 1B (Available when the device is detected by the system)

Select Enable to enable Intel® Volume Management Device Technology support for

the PCIe slot specified by the user. The options are

Disable

and Enable.

VMD port 1C (Available when the device is detected by the system)

Select Enable to enable Intel® Volume Management Device Technology support for

the PCIe slot specified by the user. The options are

Disable

and Enable.

VMD port 1D (Available when the device is detected by the system)

Select Enable to enable Intel® Volume Management Device Technology support for

the PCIe slot specified by the user. The options are

Disable

and Enable.

Hot Plug Capable (Available when the device is detected by the system)

Select Enable to enable Hot Plug support for the root ports specified by the user,

which will allow the user to change the devices on those root ports without shutting
down the system. The options are

Disable

and Enable.

Intel® VMD for Volume Management Device for PStack1

Select Enable to use the Intel® Volume Management Device Technology support for

the root port specified by the user. The options are

Disable

and Enable.

*If the feature "Intel® VMD for Volume Management Device" is set to Enable,

the following features will be available:

VMD port 2A (Available when the device is detected by the system)

Select Enable to enable Intel® Volume Management Device Technology support for

the PCIe slot specified by the user. The options are

Disable

and Enable.

Summary of Contents for SuperStorage Server SSG-6049SP-E1CR60





































































































































































Search results

Summary of Contents for SuperStorage Server SSG-6049SP-E1CR60

Reviews:

Related manuals for SuperStorage Server SSG-6049SP-E1CR60

Brands by name

Popular brands

Supermicro SuperStorage Server SSG-6049SP-E1CR60, User Manual

Search results

Summary of Contents for SuperStorage Server SSG-6049SP-E1CR60

Reviews:

Related manuals for SuperStorage Server SSG-6049SP-E1CR60

Brands by name

Popular brands