Chapter 6: BIOS
93
Onboard Video Option ROM
Use this item to select the Option ROM type for the onboard video device for system boot.
The options are Disabled,
Legacy
,
and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are
Onboard
and Offboard.
Onboard LAN OPROM Type
This item allows the user to select Option ROM type for the network (LAN) connections. The
options are
Legacy
and EFI.
Onboard LAN1 OPROM (Option ROM)/Onboard LAN2 OPROM (Option ROM)/Onboard
LAN3 OPROM (Option ROM)/Onboard LAN4 OPROM (Option ROM)
Use this item to select the type of device installed in a LAN port specified by the user for
system boot. The default setting for LAN1 Option ROM is
Enabled
. The default settings for
LAN2-LAN4 Option ROMs are
Disabled.
Onboard SAS OPROM Type
Use this item to select the Option ROM type for the SAS device specified by the user for
system boot. The options are Disabled,
Legacy
,
and EFI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are
Disabled
and Enabled. If this
item is set to Enabled, the following items will display:
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are
Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled and
Disabled
.
PXE Boot Wait Time(Available when Network Stack is set to Enabled)
Use this item to set the wait time for the BIOS to hold back PXE-boot from being executed
when the user presses the ESC key. The default setting is
0
.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration/Serial Port 2 Configuration
Serial Port
Select Enabled to enable the onboard serial port specified by the user. The options are
Enabled
and Disabled.
