Chapter 6: BIOS
91
Configure as eSATA (Available for the sSATA Port 0 Only)
Select Enabled to configure sSATA Port 0 as an external sSATA port. The options are
Enabled and
Disabled
.
sSATA Port 0 ~ Port 3 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET
initialization to the device. The options are Enabled and
Disabled
.
Port 0 ~ Port 3 sSATA Device Type
Use this item to specify if the sSATA port specified by the user should be connected to a
Solid State drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State
Drive.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
General ME Configuration
•
Operational Firmware Version
•
ME Firmware Type
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCIe/PCI/PnP Configuration
PCI Latency Timer
Use this item to configure the PCI latency timer for a device installed on a PCI bus. Select
32 to set the PCI latency timer to 32 PCI clock cycles. The options are
32
, 64, 96, 128, 160,
192, 224 and 248 (PCI Bus Clocks).
PERR# Generation
Select Enabled for the BIOS to generate a PERR (PCI/PCI-E Parity Error) number The options
are Enabled and
Disabled
.
