64
Chapter 4: Motherboard Connections
ME Manufacturing Mode
Close pins 2-3 of jumper JPME1 to bypass SPI flash security and force the system to operate
in the manufacturing mode, which will allow the user to flash the system firmware from a
host server for system setting modifications. Refer to the table below for jumper settings.
The default setting is Normal.
Manufacturing Mode
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal
Pins 2-3
Manufacturing Mode
LAN Port Enable/Disable
Use JPL3 to enable or disable LAN ports 1 and 2.
LAN Port Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
