manualshive.com logo in svg

Supermicro SuperServer SYS-1029U-TN12RV, User Manual

Share
Download
Supermicro SuperServer SYS-1029U-TN12RV User Manual Download Page 93

Chapter 6: UEFI BIOS

93

RSC-R1UW-E8R SLOT1 VMD (Available when the device is detected by the 

system)

Select Enable to use the Intel® Volume Management Device Technology for this 
device. The options are Disable and 

Enable

.

P2_NVMe0 VMD (Available when the device is detected by the system)

Select Enable to use the Intel® Volume Management Device Technology for this 
device. The options are Disable and 

Enable

.

P2_NVMe1 VMD (Available when the device is detected by the system)

Select Enable to use the Intel® Volume Management Device Technology for this 
device. The options are Disable and 

Enable

.

Hot Plug Capable (Available when the device is detected by the system)

Use this feature to enable the hot plug support for PCIe root ports 1A~1D. The op-
tions are Disable and 

Enable

.

VMD Config for PStack1

Intel® VMD for Volume Management Device

Select Enable to use the Intel® Volume Management Device Technology for this 
stack. The options are 

Disable

 and Enable.

*If the feature, Intel® VMD for Volume Management Device, is set to Enable, 

the following features will become available for user's configuration

:

RSC-R1UW-2E16 SLOT1 VMD (Available when the device is detected by the 

system) 

Select Enable to use the Intel® Volume Management Device Technology for this 
device. The options are Disable and 

Enable

.

Hot Plug Capable (Available when the device is detected by the system)

Use this feature to enable the hot plug support for PCIe root ports 2A~2D. The op-
tions are 

Disable

 and Enable.

VMD Config for PStack2

Intel® VMD for Volume Management Device

Select Enable to use the Intel® Volume Management Device Technology for this 
stack. The options are 

Disable

 and Enable.

*If the feature, Intel® VMD for Volume Management Device, is set to Enable, 

the following features will become available for user's configuration

:

Summary of Contents for SuperServer SYS-1029U-TN12RV


































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands