62
SuperServer E300-9A-4C/E300-9A-8C User's Manual
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
port specified by the user.
Note:
This item is hidden when Serial Port 1 is set to Disabled.
Serial Port 1 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select
Auto
for the BIOS to automatically assign the base I/O and IRQ address to
a serial port specified. The options are
Auto
, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port Console Redirection
COM 1 Console Redirection
Select Enabled to enable COM Port 1 for Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The options are
Enabled and
Disabled
.
*If the feature above is set to Enabled, the following items will become available for
configuration:
COM1 Console Redirection Settings
COM1 Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set. Select
VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The
options are
VT100,
VT100+
, VT-UTF8, and ANSI.
COM1 Bits Per second
Use this item to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 38400, 57600, and
115200
(bits per second).
COM1 Data Bits
Use this feature to set the data transmission size for Console Redirection. The options are
7 (Bits) and
8 (Bits)
.
