24
SuperServer E300-9A-4C/E300-9A-8C User's Manual
Installing the Hard Drive
The motherboard should be installed before installing the drive.
1. Remove power from the system as described in section 2.1 and remove the chassis
cover as described in section 2.2.
2. Remove the screws securing the hard drive tray to the support bracket and set them
aside for later use. Lift the tray out.
3. Place the drive into the tray and secure it to the tray with the screws provided with drive.
2.4 Chassis Components
Installing the Storage Drive
The SCE300 can accommodate two fixed 2.5" drives, one with bracket, one on a base mount
(only one fixed drive supported when the AOC area is occupied). Use enterprise quality drives
only.
Figure 2-4. Installing the Hard Drive
