22
SuperServer E100-9W-H/E/L/C User's Manual
2.4 Battery Removal and Installation
Battery Removal
To remove the battery, follow the steps below:
1.
Power off your system and remove the cover as described in Sections 2.1 and 2.2.
2. Remove the battery cable at the BT1 connector on the board.
3. Remove the battery.
Proper Battery Disposal
Handle used batteries carefully. Do not damage the battery in any way; a damaged battery
may release hazardous materials into the environment. Do not discard a used battery in the
garbage or a public landfill. Please comply with the regulations set up by your local hazardous
waste management agency to dispose of your used battery properly.
Battery Installation
1. Unplug the power cord.
2. Connect the battery cable into the battery connector (BT1) and push it down until you
hear a click to ensure that the cable is securely locked.
The battery is temporarily placed on the heatsink during shipping. Use the foam tape on the
back side of the battery to secure the battery to a flat surface on the bottom of the motherboard
or a proper location in the system. Do not place the battery on the heatsink during operation.
