manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, User Manual, Page: 78 / 155

Share
Download
Supermicro SuperServer 7089P-TR4T User Manual Download Page 78

78

SuperServer 7089P-TR4T User's Manual

DOM Power Connectors

Two power connectors for SATA DOM (Disk_On_Module) devices are located at JSD1/JSD2. 
Connect appropriate cables here to provide power support for your Serial Link DOM devices. 

DOM PWR 

Pin Definitions

Pin# 

Definition

1

+5V

2

Ground

3

Ground

RAID Key

The Intel RAID key header (JRK1) is used to enable RAID support for your system. Connect 
an appropriate cable here to provide RAID support to your SATA devices. See the table below 

for the pin out definitions for JRK1.

RAID Key 

Pin Definitions

Pin# 

Definition

1

Ground

2

PU 3.3V Standby

3

Ground

4

PCH RAID Key

IPMI LAN

An IPMI_dedicated LAN, located on the AOM-X11OPi-LBG, provides KVM support for IPMI 
2.0. This port accepts an RJ45_type cable.

IPMI LAN Activity LED (Right)

 LED State

LED Color

Status

Definition

Yellow

Blinking

Active

IPMI LAN LED Indicators

The IPMI LAN has two LED indicators. The yellow LED on the right indicates activity, while 
the green LED on the left indicates the speed of the connection. Refer to the table below for 
LED settings. 

Link LED

Activity LED

IPMI LAN

IPMI LAN Link LED (Left)

 LED State

LED Color

Definition

Off

10 Mbps

Green

100 Mbps

Amber

1 Gbps

Summary of Contents for SuperServer 7089P-TR4T




























































































































































Reviews:

No comments