Supermicro SuperServer 7089P-TR4T User Manual Download Page 114

Page: 114 / 155

114

SuperServer 7089P-TR4T User's Manual

TXT Support

Select Enabled to enable Intel Trusted Execution Technology (TXT) support to enhance
system security and data integrity. The options are

Disabled

and Enabled.

Note 1

: If the option for this item (TXT Support) is set to Enabled, be sure to disable EV DFX

(Device Function On-Hide) support for the system to work properly. (EV DFX is under "IIO

Configuration" in the "Chipset/North Bridge" submenu)

Note 2:

For more information on TPM, please refer to the TPM manual at http://www.

supermicro.com/manuals/other.



Intel® Virtual RAID on CPU

When this submenu is selected and the RAID devices are detected, the BIOS screen displays
the following information:
Intel® VROC with VMD Technology 5.1.0.1006]

Note

: If RAID configuration is enabled in yo

ur system, information on RAID volumes and Intel

VMD controllers will be displayed.

Summary of Contents for SuperServer 7089P-TR4T




























































































































































Search results

Summary of Contents for SuperServer 7089P-TR4T

Reviews:

Supermicro SuperServer 7089P-TR4T, User Manual, Page: 114 / 155

Search results

Summary of Contents for SuperServer 7089P-TR4T

Reviews: