manualshive.com logo in svg

Supermicro SuperServer 7089P-TR4T, User Manual, Page: 101 / 155

Share
Download
Supermicro SuperServer 7089P-TR4T User Manual Download Page 101

Chapter 6: BIOS

101

Legacy USB Support

Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support 
if there are no legacy USB devices present. Select Disable to have all USB devices available 
for EFI applications only. The options are 

Enabled, 

Disabled and Auto.

XHCI Hand-Off

This is a work-around solution for operating systems that do not support XHCI (Extensible 

Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the 

XHCI driver. The options are Enabled and 

Disabled

.

Port 60/64 Emulation

Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete 
legacy USB keyboard support for the operating systems that do not support legacy USB 
devices. The options are 

Enabled

 and Disabled.

Port 61h Bit-4 Emulation

Select Enabled for I/O Port 61h-Bit 4 emulation support to enhance system performance. The 
options are Enabled and 

Disabled

.

Install Windows 7 USB Support

Select Enabled to install the Windows 7 USB utility to support legacy USB devices for Windows 
7 systems. The options are Enabled and 

Disabled

.

Server ME (Management Engine) Configuration

This feature displays the following system ME configuration settings.

Open (Operational) Firmware Version
Backup Firmware Version
Recovery Firmware Version
ME Firmware Status #1/ME Firmware Status #2

Current State
Error Code

(PCH) SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA 
devices that are supported by the Intel PCH chip and displays the following items:

SATA Controller

This item enables or disables the onboard SATA controller supported by the Intel PCH chip. 
The options are 

Enable

 and Disable. 

Summary of Contents for SuperServer 7089P-TR4T




























































































































































Reviews:

No comments