55
Chapter 3: Maintenance and Component Installation
Power Supply LEDs
On the rear of the power supply module, an LED displays the status.
•
Solid Green
: When illuminated, indicates that the power supply is on.
•
Blinking Green
: When blinking, indicates that the power supply is plugged in and turned
off by the system.
•
Blinking Amber:
When blinking, indicates that the power supply has a warning condition
and continues to operate.
•
Solid Amber
: When illuminated, indicates that the power supply is plugged in, and is in
an abnormal state. The system might need service. Please contact Supermicro technical
support.
Replacing the Power Supply
1. Unplug the AC cord from the module to be replaced.
2. Push the release tab on the back of the power supply as illustrated.
3. Pull the power supply out using the handle.
4. Replace the failed power module with the same model.
5. Push the new power supply module into the power bay until it clicks.
6. Plug the AC power cord back into the module.
Figure 3-14. Installing a Power Supply Module
Handle
Release Tab
2
3
