5-6
S
UPER
S
ERVER 6026TT-TF/IBXF/IBQF User's Manual
Remove power from the system
1.
and unplug the AC power cord
from the power supply.
Using a screwdriver, loosen and
2.
remove the heatsink screws
from the serverboard in the
sequence as show in the pic-
ture on the right (two diagonal
screws fi rst, then the remaining
two).
Hold the heatsink as shown
3.
in the picture on the right and
gently wriggle the heatsink to
loosen it from the CPU. (Do not
use excessive force when wrig-
gling the heatsink.)
Once the heatsink is loose,
4.
remove it from the CPU socket.
To reinstall the CPU and the
5.
heatsink, clean the surface of
the CPU and the heatsink to get
rid of the old thermal grease.
Reapply the proper amount of
thermal grease on the CPU
surface before reinstalling the
heatsink.
Remove Screw #1
Remove Screw #2
Warning!
We do not recommend that the CPU or the heatsink be
removed. However, if you do need to uninstall the heatsink, please
follow the instructions below to prevent damage to the CPU or the
CPU socket.
!
Removing the Heatsink
Summary of Contents for SUPERSERVER 6026TT-IBQF
