Supermicro SUPERSERVER 6022P-8R, User Manual

Page: 79 / 106

Chapter 7: BIOS
7-11
Base I/O Address
Select the base I/O address for the parallel port. The options are 378,
278 and 3BC.
Interrupt
Select the IRQ (interrupt request) for the parallel port. Options are
IRQ5 and IRQ7.
Mode
Specify the parallel port mode. Options are Output Only, Bi-directional,
EPP and ECP.
DMA Channel
Specify the DMA channel. Options are DMA1 and DMA3.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled and Auto (BIOS
controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
Primary and Secondary.
u
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Enable Memory Gap
This setting allows you to turn off system RAM to free up address space.
The options for this setting are Disabled and Extended.