Supermicro SUPERSERVER 6022P-8R, User Manual

Page: 62 / 106

6-4
S
UPER
S
ERVER 6022P-8R/6022P-8 Manual
Figure 6-2. System Cooling Fans
(shown without active CPU heatsinks)
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SCSI Drives: You do not need to access the inside of the chassis to
replace or swap SCSI drives. Proceed to the next step for instructions.
Note: You must use standard 1" high, 80-pin SCA SCSI drives in
the SuperServer 6022P-8R/6022P-8.
CD-ROM/Floppy Disk Drive: For installing/removing the CD-ROM or floppy
disk drive, you will need to gain access to the inside of the server by
removing the top cover of the chassis. Proceed to the "CD-ROM and
Floppy Drive Installation" section later in this chapter for instructions.
5 1/4" Drive Bay: For installing/removing a component in the 5 1/4" drive
bay, proceed to the "5 1/4" Drive Bay Installation" section later in this
chapter for instructions.
Top Chassis
Cover (removed)
Motherboard
Cover Release Buttons
System Cooling Fans
Power Supply
System Memory