Supermicro SUPERSERVER 6021i, User Manual

Page: 50 / 110

5-16
S
UPERSERVER 6021i User’s Manual
Universal Serial Bus (USB)
Four Universal Serial Bus connec-
tors and headers are located on
USB1 and JUSB1. The USB1 is lo-
cated next to the PS/Mouse con-
nector and the JUSB1 is located
close to SDRAM slots. See Table
5-15 for pin definitions.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the
PS/2 mouse are located on J12.
See Table 5-14 for pin definitions.
(The mouse port is above the key-
board port. See Figure 2-3 for lo-
cations.)
Speaker Connector
The speaker connectors are lo-
cated on pins 7-11 of JF9. See
Table 5-13 for pin definitions. Pins
10-11 "Enable" onboard speaker.
External speakers connect to pins
8 and 11 of JF9.
RAID_LED Connector
The PW_LED connector is located
on pins 1 through 3 of JP9
. See
Table 5-12 for pin definitions.
Table 5-12
RAID_LED
Pin Definitions
JP9
Pin
Number
1
2
3
Definition
+5V Pull-Up
RAID_Signal
RAID_Signal
T able 5-13
Speaker
Pin Definitions
JP9
Pin
Number
7
8
9
10
11
Definition
Spkr (+) Pull-Up
NC
Spkr (+) Pull-Up
O nboard Spkr (-)
Spkr (-) Signal
T able 5-14
PS/2 Keyboard
and Mouse Port
Pin Definitions
J12
Pin
Number
1
2
3
4
5
6
Definition
Data
NC
G round
VCC
Clock
NC
T able 5-15
Universal Serial Bus Pin Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
USB1
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 Ground
JUSB1
USB4 USB3
USB2 USB1
Ground