Supermicro SUPERSERVER 6018R-TDTP, User Manual

Page: 69 / 75

Chapter 7: BIOS
7-39 7-38
S
UPER
S
ERVER 6018R-TDTP/TDTPR User's Manual
7-8 Save & Exit
Select the Save & Exit tab from the BIOS setup screen to configure the settings
below.
Discard Changes and Exit
Select this option to quit the BIOS setup without making any permanent changes
to the system configuration, and reboot the computer. Select Discard Changes and
Exit from the Exit menu and press <Enter>.
Save Changes and Reset
After making system configuration changes, select this option to leave the BIOS
setup utility and reboot the computer for the new system configuration parameters
to take effect. Select Save Changes and Exit from the Exit menu and press <Enter>.
Save Options
Save Changes
After making system configuration changes, select this option to save all changes
made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes you've made and
return to the AMI BIOS Utility Program.
Restore Optimized Defaults
To set this feature, select Restore Optimized Defaults from the Exit menu and press
<Enter>. These are manufacture default settings designed for maximum system
performance but not for maximum stability.
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <En-
ter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <En-
ter>. Use this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows the user to override the Boot priorities sequence in the Boot
menu, and immediately boot the system with another device specified by the user.
This is a one-time override.