Supermicro SUPERSERVER 6018R-TDTP, User Manual

Page: 7 / 75

1-2 1-3
Chapter 1: Introduction
S
UPER
S
ERVER 6018R-TDTP/TDTPR User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6018R-TDTP/TDTPR lies the X10DRD-LTP, a dual
processor serverboard based on the Intel PCH C612 chipset. Below are the main
features of the X10DRD-LTP (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRD-LTP supports single or dual Intel ® Xeon ® E5-2600 v3/v4 series pro-
cessors in R3-LGA2011 sockets. Please refer to the serverboard description pages
on our website for a complete listing of supported processors.
Memory
The X10DRD-LTP has eight DIMM sockets that can support up to 1 TB of LRDIMM
(Load Reduced DIMM) or up to 512 GB of ECC RDIMM (Registered DIMM) DDR4-
2400/2133/1866/1600 memory. Please refer to Chapter 5 for installing memory.
SATA
Six SATA 3.0 ports are supported by the Intel PCH (I-SATA0-5). These ports are
RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable units.
Note: Documentation on RAID setup guidelines can be found on our website.
I/O Ports
The rear I/O ports include one COM port, a VGA (monitor) port, four USB 2.0 ports
and two 10 Gb Ethernet SFP+ ports. A dedicated IPMI LAN port is also included.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC815TQ-600CB/
SC815TQ-R500CB chassis.
System Power
When configured as the SuperServer 6018R-TDTP/TDTPR, the SC815TQ-600CB
includes a single high-efficiency 600W power supply and the SC815TQ-R500CB
includes a redundant, 500W hot-plug, high-efficiency power supply, respectively.
Hard Drive Subsystem
The SC815TQ-600CB/SC815TQ-R500CB chassis was designed to support four
hot-swap SATA hard drives.
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (two) and UID/overheat/fan
fail/power fail. A main power button and system reset button is also included.
Cooling System
The SC815TQ-600CB/SC815TQ-R500CB chassis has an innovative cooling design
that features five 4-cm counter-rotating fans located in the middle section of the
chassis. Fan speed may be controlled via IPMI. The power supply module also
includes a cooling fan.