Supermicro SUPERSERVER 6013L-8, User Manual

Page: 87 / 108

Chapter 7: AMIBIOS
7-17
Plug & Play OS
This option specifies how Plug and Play devices will be configured. The
settings are Yes and No . No lets BIOS configure all devices in the system.
Yes lets the operating system (if supported) configure PnP devices not
required for bootup.
Reset Configuration Data
Choosing the Yes setting will cause the PnP configuration data in the BIOS
to be cleared on the next boot up. Choosing the No setting does not force
PnP data to be cleared on the next boot.
Allocate IRQ to VGA
This option lets you allocate an interrupt request (IRQ) to the PCI VGA
adapter card (if used). The settings are Yes and No.
PCI IDE BusMaster
The settings for this option are Disabled and Enabled. Enable to specify
that the IDE controller on the PCI bus has bus mastering capabilities.
USB Function
The settings for this option are Disabled and Enabled . Disabled prevents
the use of the USB ports and Enabled allows the use of the USB ports.
Legacy USB Support
This option allows you to enable support for Legacy USB. The settings are
Auto , Enabled and Disabled.
ARMD Emulation Type
This settings for this option are Hard Disk , Auto and Floppy.